Reflex Degassing System

Pressurisation unit compressor-controlled
Reflexomat – Compressor – Controlled Dynamic Pressure Maintenance
• Compressor-controlled pressurisation system for heating and chilled water systems up to 120°C max. flow temperature
• Maintains the pressure level within +/- 0.1 bar boundary
• Meets or exceeds EC norms for pressure vessels 2014/108/EC directives
• Superior quality butyl bladder according to German DIN EN 13831 norm part 3, max. operating temperature 70°C
• Microprocessor control with display in 8 languages
• Permanent display of system pressure and tank volume level
• 230 V output for fully automated water make-up
• 2 dry contacts (common fault, min. water level) for touch control unit
• Data output through RS-485 (from VS 90/2 and VS 150)
• Durable epoxy coating with attractive grey colour
Reflexomat Control Unit
• Compressor-controlled pressurisation unit for heating and chilled water systems
• Degree of protection: IP 54
• Power supply 230/400 V
• Common fault signal and RS 485 interface
• Control Touch from RS 150 as standard,
• Control Touch: graphic menu display,permanent display of the operating parameters, extensive interfaces, e.g. for BMS connection, remote monitoring

Pump Controlled Pressurisation Systems
Variomat Pressurisation Systems
• Heavy duty steel tank
• Approval in acc. with the 2014/108/EC directives
• Replaceable butyl bladder in accordance with DIN EN 13831
• Max. system temperature 120°C
• Max. operation temperature 70°C
• Durable epoxy coating with attractive grey colour
Variomat Control Units
• Variomat controller VS 1 with Control Basic
• From Variomat controller VS 2 with Control Touch and soft start
• Perm. advance temperature 120°C
• Perm. operating temperature 70°C
• Perm. ambient temperature 0 – 45°C
• Sound level approx. 55 dB(A)
• Degree of protection: IP 54
• Water make-up connection Rp 1/2”
• Pump/overflow valve connection Rp 1/Rp 1
• Common fault signal and RS 485 interface

• Vacuum spray-tube deaeration with intergrated water make-up systems used in conjunction with diaphragm expansion vessels or pressurisation systems
• Ideally suited for high-rise buildings and district heating / cooling systems
• Flexible adjustment of the Servitec Magcontrol or Levelcontrol operating modes
• Central deaeration of the water in the system and make-up water
• Max. operating pressure:
  8bar – type 25, 35, 60
  10bar – type 75, 95, 120
• Max. flow temperature: 120°C
• Microprocessor controller with plain text display for pressure
• Floating contact for common message
• Simple commissioning with auto setup
• Patented, fully automatic overflow regulation
• Safe control (water make-up using the actuator valve)
• Water make-up is possible from a storage tank (on site)
• Control Touch from Servitec 120

High outputs and high pressures are the specialty of the Variomat Giga. Standard solutions are offered up to 30 MW and beyond that Reflex additionally offers non-standard solutions. In-line units are fitted upstream of the Variomat Giga in hot water networks. In all cases we would recommend planning and design in conjunction with Reflex.
Large heat generation systems on the primary side are typical for this sector. Heat is transported along a wide network of district heating pipes to a large number of small terminal stations, where it is transferred to the secondary side and supplied to customers. Reflex offers an extensive range of professional solutions for the primary side and for transfer to the secondary side.